What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 07:18
a photo is worth a thousand words.
In schematic diagrams this is the symbol for a fuse:
There are two important concepts here.
There are three different concepts here that are getting confused.
This is 'the assistant's answer'
An AC voltage/ current source, and an ac inductive load.
what exactly is a ‘surge’ protector?
A circuit breaker is similar, but is resettable.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Now when you have a certain ac resistance, then a current flows in a loop.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
These devices are installed between the “hot” and “neutral” and protective ground.
These are simplified answers to the original question, and does not change anything I wrote above.
This is where this question deviates from being a 'generic' question, and becomes more specific.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What are the biggest challenges in training multimodal AI models?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The third is lightning and “how it gets conducted into a home.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–10[John johnson John Johnson ]
A fuse is a non-resetable over current circuit protector.
[old diagram got deleted by accident]
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes the function of a fuse.
eight
Are seed oils really bad for you? - BBC
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is lightning?
AMD CEO Su turns heads with comments at AI event - TheStreet
He then describes Rainy Season and Lightning.
but this device (an Inductor) … impedes the rapid changes in the current.
I post the exact comment here.
If you get a chance to have sex with either Kajal Agarwal or Samantha, who would you choose and why?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–14 [Omar Gharbi Omar Gharbi ]
What are three skills that you would like to have, and why?
[image of Common-mode choke]
nine
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At least they know the answer if they wanted it.
What does a fuse do?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This device then solves the entire problem.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
the problem then depends on "how fast does the fuse operate?".
Upvotes:
At one ohm, the resistor has a maximum of 1 watt power.
The other is “what does a “fuse” do?”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then asserts :
Because the load is inductive, the current lags the voltage.(by a bit).
This one hit behind the barn.
The bolt then partially travels down the line to your home.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
but I think this circuit , shows a few more pieces.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Here is a simplified AC power diagram.
The MOV will conduct when the voltage exceeds 50% of line voltage.
One
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It also is a device that limits the change in current flow.
Edit 2024–10.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
But it can get overloaded, and no longer works.
(Dc diagram shown, AC is similar).
Barnstars:
so, what happens?
First Sentence:
It seems Mohan does not understand the difference between a comment and an Answer.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–16 [ OO OLAOYE OYEBODE ]
This is the picture of an electronic coil of wire wound around a core of magnetic material.